Quick answer: The APV80 + VPF100 workflow is print, laminate and apply. Print the graphic on APV80, finish it with VPF100 gloss overlaminate, then cut, prepare and install the finished graphic on the vehicle or commercial surface.
A good graphics material system should be easy to turn into a repeatable production process. APV80 + VPF100 is built around a straightforward workflow that print shops and wrap shops can standardize.
First, prepare the artwork. Vehicle graphics often require panel planning, bleed, sponsor placement, number placement, contour cutting and installation sequencing. The better the file preparation, the smoother the installation.
Second, print on APV80. The film is designed for solvent, eco-solvent, latex and UV printing. The printed APV80 layer carries the full-color graphic.
Third, laminate with VPF100. After the print is ready according to the shop’s production requirements, VPF100 is applied as the optically clear gloss protection layer.
Fourth, cut and apply. The finished graphic can then be trimmed, sectioned and installed on the vehicle, fleet unit, sign or POP surface.
Finally, inspect the result. Check gloss, alignment, edge quality, bubbles, panel transitions and key brand visibility.
Workflow Table
| Step | Task | Material Role |
|---|---|---|
| 1 | Prepare artwork | Confirm vehicle layout and print file |
| 2 | APV80 carries the full-color image | |
| 3 | Laminate | VPF100 protects the print |
| 4 | Cut | Prepare panels and sections |
| 5 | Apply | Install on vehicle or commercial surface |
| 6 | Inspect | Check finish, alignment and edges |
FAQ
How do you use APV80 and VPF100 together?
Print the graphic on APV80, laminate it with VPF100, then cut and apply the finished graphic.
Why is lamination part of the workflow?
Lamination helps protect the printed image and provides a consistent finished surface.
Is this workflow suitable for fleet production?
Yes. The print, laminate and apply workflow is suitable for repeatable fleet graphics production.
Discuss Your Production Workflow
Printer, ink, laminate, surface and installation conditions can change the result. Contact MaxDecals USA to review the application and request a sample-based evaluation before production.